A robot mower purchase begins with a garden survey. A modest lawn split by steps can present a different challenge from a larger, open rectangle. Work out where the robot needs to travel, what it must avoid and where you would still need to help.
Our examples are the MAMMOTION LUBA mini 2 AWD 1500 and YUKA mini 2 1000. This guide interprets their manufacturer's published specifications; it is not a mowing test, an installation approval or a promise that either will suit your site.
Measure grass area and access separately
Draw each area of grass and the path between them. Exclude the house, driveway and garden beds from the mowing area. Mark gates, steps, steep transitions and places where carrying the mower might be necessary. Then record the narrowest usable passage, not just the width between fence posts.
MAMMOTION rates the LUBA mini 2 AWD 1500 for up to 1,500 square metres and the YUKA mini 2 1000 for up to 1,000. Use these as capacity limits to investigate, not a guarantee of completion in your preferred hours. Ask how charging, grass growth and multiple zones affect the proposed schedule.
- Identify a charging location with the required approach space and power.
- Check how the robot crosses paths and reaches disconnected lawns.
- Tell the seller about seasonal changes, temporary furniture and routinely closed gates.
02Understand slope figures before paying for extra traction
Slope percentage and angle are different measurements. A 45% gradient is approximately 24 degrees, not 45 degrees. MAMMOTION lists an 80% maximum for LUBA mini 2 AWD 1500 and 45% for YUKA mini 2 1000; the models also differ in drive configuration.
Measure the steepest section and describe its surface. Ask about turning, stopping and boundary placement on slopes, not only travelling uphill. Do not infer that a maximum laboratory or manufacturer rating guarantees operation on wet grass, holes, loose soil or a steep drop beside the lawn.
03Choose navigation for the site, not the buzzword
Wire-free does not describe a single navigation system. Satellite-based RTK, cameras and LiDAR have different installation requirements. For example, Husqvarna's EPOS guidance explains how buildings and dense tree cover can obstruct satellite reception. Check the exact system and its supported backup methods.
The two MAMMOTION examples here are LiDAR-based models; LUBA mini 2 AWD 1500 also lists dual-camera vision. They should not be confused with earlier similarly named products. Ask the manufacturer to assess narrow side yards, overhead cover, reflective features and poorly defined boundaries using photos of your garden.
04Inspect edges and the work left for you
Walk around walls, beds, tree roots and raised edging. Ask where the cutting disc can actually reach and what clearance the machine needs. Plan for any strip that still needs trimming. Confirm the cutting-height range against the height you want to maintain, rather than buying on lawn area alone.
Write down the routine that remains: clearing objects, checking blades and sensors, cleaning as instructed and moving the machine between inaccessible areas. Follow the operating instructions around children, pets and wildlife; object-recognition marketing does not replace those instructions.
05Compare the complete package and local support
Request a complete list of the mower, station, installation equipment and optional connectivity. The YUKA mini 2 1000 listing treats its 4G module as an add-on. Separate delivered functions from features described as future updates, and ask whether any service has a trial period or later charge.
Before ordering in Australia, confirm replacement blades, battery service, repair location and transport arrangements. If the layout is borderline, seek a documented site assessment or suitable return arrangement. Agree on how the first setup will demonstrate coverage of the difficult sections.
- Compare the same included equipment and installation work in every quote.
- Ask who remaps or repairs the system after a garden change.
- Confirm theft-related features and storage instructions for the exact model.
A little more clarity
Questions before choosing.
Does a wire-free mower need no setup?
No. It still needs a suitable charging position, boundaries and an operating area that meets its navigation requirements. Some systems also need reference hardware, connectivity or installation work. Check the exact model.
Will a robot mower cut right against a wall?
That depends on the cutting-disc position, required clearance and the wall or edging. Ask what strip will remain at your particular edges and allow for separate trimming where necessary.
Are LUBA mini AWD and LUBA mini 2 AWD the same model?
No. Our listing is specifically LUBA mini 2 AWD 1500. Check the full name, navigation hardware and rated capacity; specifications from an earlier or differently sized model may not apply.
Put the questions to work
Explore relevant robots.
These catalogue entries give you somewhere to start. Their inclusion is not a claim of suitability or a performance ranking.
MAMMOTION
An all-wheel-drive lawn mower using LiDAR and camera navigation for lawns up to its rated area.
- Buying route
- Official online store
- Market
- Australia
Details, sources & caveats 
MAMMOTION
A robotic lawn mower for gardens up to 1,000 square metres, with an adjustable cutting height.
- Buying route
- Official online store
- Market
- Australia
Details, sources & caveats 
